Arduino Uno R3 with micro-usb port



This is ATmega328P development board compatible with the Arduino UNO R3 and its uploading interface is Micro USB socket
It is 100% compatible with Arduino UNO R3 program, expansion shields, IDE.

1. Direct by phone with Micro USB cable to the burning process;

2. Using Micro USB interface, compatible with more expansion boards;

3. USB to serial chip (CH340) supports win7 / win8 32bits, 64bits, Linux.

The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 14 (of which 6 provide PWM output)
Analog Input Pins 6
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 150 mA
Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM
2 KB (ATmega328) EEPROM
1 KB (ATmega328)
Clock Speed 16 MHz


There are no reviews yet.

Be the first to review “Arduino Uno R3 with micro-usb port”

No announcement available or all announcement expired.